Fix igdkmd32.sys blue screen failure in Windows 10

Fix igdkmd32.sys blue screen failure in Windows 10

Blue Screen of Death error of the computer is usually an indicator of a hardware problem, but BSOD can be caused by specific software in some cases. If you get a BSOD on Windows 10 says there is a problem with igdkmd32.sys, you should know that the problem is caused by the software and can be easily remedied by following one of our solutions.

Fix – BSOD error caused by igdkmd32.sys in Windows 10

Fix 1 – Uninstall your current display driver.

A display driver problem can cause problems with igdkmd32.sys on Windows 10, and if it happens, we highly recommend that you uninstall your installed display driver. To do this, follow these steps:

  1. Press Windows Key + X and select Device Manager from the list
  2. After the Device Manager is open, please navigate to the display adapter and develop it.
  3. Finding your display driver, right-click, and select Uninstall it from the menu.
  4. Then Delete the driver software for this device and click OK.
  5. Once removed your display adapter, restart your computer.
  6. Some users suggested to select the Disable option is not Uninstall, so be sure to try it too. If the problem remains still, we strongly suggest visiting your graphics card manufacturer’s website and downloading the latest driver for your graphics card.


Fix 2 – Uninstall TeamViewer

According to users, sometimes software like TeamViewer, VMWare, DisplayFusion, or LogMeIn Hamachi can cause these problems. To fix this problem, you must remove the problematic software. Users report that removing TeamViewer fixed their problems, but if you do not use TeamViewer, try removing the software.

Fix 3 – Disable hybrid graphics

Users report that disabling the BIOS’s hybrid graphics can stop the problem with igdkmd32.sys in Windows 10. To disable the hybrid graphics, perform the following steps:

  1. Restart your PC and keep pressing the F2 or Del key on your keyboard while your computer boots. In particular, motherboard, perhaps a different key, so it’s always a good idea to check your motherboard manual.
  2. Once you enter the BIOS, you need to select Hybrid Graphics and turn it off. To find this option, please check your motherboard manual.
  3. Save the changes and restart your computer.

Leave a Reply

Your email address will not be published. Required fields are marked *